Paint Film Bending Tester Cylinder Bend Tester Cylindrical Axis Bending Tester Cylindrical Mandrel Bend Tester for Paints and varnishes-Bend Test with Box

Working principle:Insert the test plate between the tie rod and the conical shaft, and clamp the lever with a splint, turn the shaft from front to back (to bend the test plate around the conical shaft), and measure it according to the crack position of the coating on the test plate its peeling properties.Standards compliant: Comply with: ISO6860-1984(E), ASTME522-60(1979), BS3900；PartE11:1985 GB/T11185-89 execution standards. Parameters: Material: stainless steel + iron Test plate substrate thickness: ≤ 0.03inch (0.8mm) Shaft rod size Shaft small end diameter: 0.1inch (3.2mm) Shaft rod size Shaft big end diameter: 1.5inch (38mm) Taper shaft length: 8inch (203mm) Size:11*5.5*12.4 inch (280*140*315mm)Package Including1*Paint Film Cone Bending Tester

• Widely Use: This paint film bending tester is a special instrument to evaluate the cracking resistance or peeling off from metal plate when the coating of color paint and related products is bent around the cylinder shaft under standard conditions
• Working principle: Insert the test plate between the tie rod and the conical shaft, and clamp the lever with a splint, turn the shaft from front to back (to bend the test plate around the conical shaft), then measure it according to the crack position of the coating on the test plate its peeling properties
• Comply with: ISO6860-1984(E); ASTME522-60(1979); BS3900；PartE11:1985; GB/T11185-89 execution standards
• Parameters: Material: stainless steel + iron; Test plate substrate thickness: ≤ 0.03inch (0.8mm); Shaft rod size Shaft small end diameter: 0.1inch (3.2mm); Shaft rod size Shaft big end diameter: 1.5inch (38mm); Taper shaft length: 8inch (203mm); Size:11*5.5*12.4 inch (280*140*315mm)
• Easy to Use：Carefully cover test panel with paper between mandrel and draw bar and clamp the probe.Fold the test panel around the cone by using the manually operated arm. Bend uniformly at 180° within 15 seconds, examine the coating for cracks